Pipe Joint Compounds, Packings a
*1"x520" PTFE TAPE
PTFE thread seal is manufactured from virgin PTFE. Thickness 3 mil., .4 density, material meets MIL-T27730A specification. Suitable for use on oxygen and potable water systems. Plastic spool and shell. Bulk packed.
Detect any gas leak in just a few seconds on all types of tubing, valves, cylinders, pressurized tanks, or any system under air, gas or oxygen pressure. May be used at temperatures between -50 deg. F. to +160 deg. F. Nontoxic, biodegradable, user friendly, noncorrosive, nonirritating to most skin. 2 oz. plastic spray bottle.
Silicone grease is a 90\% pure silicone product which contains no petroleum additives and offers greater heat resistance, up to 450 deg. F., than lithium based greases. Nonstaining. Apply to rubber and synthetic O-rings. 1/2 fl. oz. cup inblister card.
Long-lasting and flexible. Will not support bacteria or harden, shrink, crack, or crumble even if can is left open. For setting bowls, rims, strainers, faucets, etc. Do not use on marble, synthetic marble, other porous surfaces or on plastic lavatories and fixtures. Meets Federal Specification TT-P-1536A.
Pure white pipe thread sealant. Nonhardening. Withstands up to 3000 P.S.I. and temperatures from -50 deg. F. to +500 deg. F. For use on PVC, ABS, CPVC, polypropylene, iron, or steel threads. Apply to clean Male threads and assemble the joint. Not for use on oxygen systems.
Ideally suited for all threaded connections involving gas line installations for natural gas, propane, butane, and/or water, oil, and chemicals. Withstands up to 10,000 P.S.I. and temperatures of -450 deg. F. to +550 deg. F. Full 1.6 density. .0035 thickness plus .0005". Meets MIL T-27730A specification. 1 spool per header card bag.
Rectorseal No. 5 pipe thread sealant is a soft-set, slow drying compound which seals, lubricates, and protects threaded pipe and fittings. It is recommended for a wide range of applications including threaded PVC, polyethylene, galvanized steel, iron, copper, brass, aluminum, stainless steel, and fiberglass reinforced pipe. Temperature range of -50 deg. F. to +400 deg. F. Brushable to +20 deg. F. Brush top can.
Rectorseal No. 5 pipe thread sealant is a soft-set, slow drying compound which seals, lubricates, and protects threaded pipe and fittings. It is recommended for a wide range of applications including threaded PVC, polyethylene, galvanized steel, iron, copper, brass, aluminum, stainless steel, and fiberglass reinforced pipe. Temperature range of -50 deg. F. to +400 deg. F. Brushable to +20 deg. F. Brush top can.
Won't burn out in sand, sediment, or lime. Recommended for areas with hard water or high mineral content. Lifetime limited warranty against burnout. Wrinkle design.
High-quality polyethylene pipe wrap for industrial use. Superior all-weather moisture proof pipe protection for steel pipe, fittings, and electrical conduit systems. UPC listed. 2 In. W. x 100 Ft. L.
Twisted jute packing specially treated to expand when wet to provide watertight joints. Prevents root penetration but allows moisture to pass through to activate high swelling inorganic additive. Will not rot and meets or surpasses all municipal and federal codes and specifications.
Nontoxic. A special viscous paste designed for easy application. Recommended for leakproofing threaded, flanged, and all other assembly line connection work. Sets pliable; nondripping, nondeteriorating to PVC. Permits easy disassembly. Compares with higher priced top-quality thread compound.
Nontoxic. A special viscous paste designed for easy application. Recommended for leakproofing threaded, flanged, and all other assembly line connection work. Sets pliable; nondripping, nondeteriorating to PVC. Permits easy disassembly. Compares with higher priced top-quality thread compound.
Nontoxic. A special viscous paste designed for easy application. Recommended for leakproofing threaded, flanged, and all other assembly line connection work. Sets pliable; nondripping, nondeteriorating to PVC. Permits easy disassembly. Compares with higher priced top-quality thread compound.
Nontoxic. A special viscous paste designed for easy application. Recommended for leakproofing threaded, flanged, and all other assembly line connection work. Sets pliable; nondripping, nondeteriorating to PVC. Permits easy disassembly. Compares with higher priced top-quality thread compound.
Pure white pipe thread sealant. Nonhardening. Withstands up to 3000 P.S.I. and temperatures from -50 deg. F. to +500 deg. F. For use on PVC, ABS, CPVC, polypropylene, iron, or steel threads. Apply to clean Male threads and assemble the joint. Not for use on oxygen systems.
DIY quick-fix pipe repair kit stops leaks. Hardens in minutes. Bonds to any pipe material. Repairs T-joints and elbows. Safe for drinking water. Includes RectorSeal EP-200 epoxy putty (NSF certified, ANSI/NSF 61). For plumbing, HVAC, pool, spa, and irrigation applications.
PTFE thread seal is manufactured from virgin PTFE. Thickness 3 mil., .4 density, material meets MIL-T27730A specification. Suitable for use on oxygen and potable water systems. Plastic spool and shell. Individually boxed with hang tab.
PTFE thread seal is manufactured from virgin PTFE. Thickness 3 mil., .4 density, material meets MIL-T27730A specification. Suitable for use on oxygen and potable water systems. Plastic spool and shell. Individually boxed with hang tab.
Great Blue pipe joint compound has all the benefits of a PTFE based thread sealant without the mess. Great Blue is a flexible, blue, nonhardening, nonseparating, nontoxic, paste that has no odor and cleans up easily. Use on PVC, CPVC, ABS, polyethylene, polypropylene, iron, steel, copper, or brass threads up to and including 2". Withstands up to 3000 P.S.I. on gases from -50 deg. F. to 400 deg. F. and 10,000 P.S.I. on liquids from -50 deg. F. to 500 deg. F. ABS, cycolac, natural gas, steam, air lines, caustics, and diluted acids.
1/4" thick sponge rubber gasket material for use with saddle tees or other applications. Fits with 4" saddle. 6" x 7" x1/4".
The quick and easy way to use plumbers putty when installing plumbing fixtures. Contains 1 paper backed roll plumbers putty 54" L. x 3/4" W. for setting plumbing fixtures, tubs, and sinks. Simply remove paper from portion being used. Use as a seal for fixtures, tubs, sinks, and more. Do not use on marble, synthetic marble, other porous surfaces or on plastic lavatories and fixtures.
Long-lasting and flexible. Will not support bacteria or harden, shrink, crack, or crumble even if can is left open. For setting bowls, rims, strainers, faucets, etc. Do not use on marble, synthetic marble, other porous surfaces or on plastic lavatories and fixtures. Meets Federal Specification TT-P-1536A.
Long-lasting and flexible. Will not support bacteria or harden, shrink, crack, or crumble even if can is left open. For setting bowls, rims, strainers, faucets, etc. Do not use on marble, synthetic marble, other porous surfaces or on plastic lavatories and fixtures. Meets Federal Specification TT-P-1536A.
2 oz. Thixotropic nondrip paste for pipe joint threads on lines carrying water, steam, or air. Prevents corrosion to threads, never hardens, joints separate easily. Contains no lead, nontoxic, gray. Now in new long life hang-tab tube.
1-1/4 oz. Pipe thread compound in stick form. Lubricates, seals, and prevents rust and corrosion. For pressures up to 5000 P.S.I., temperatures up to 750 deg. F. Use on metal or plastic pipe carrying air, water, steam, oil, gasoline, freon, ammonia, propane and butane. Heavy PVC tube outside compound stick allows compound to be pushed through as needed.
PTFE thread seal is manufactured from virgin PTFE. Thickness 3 mil., .4 density, material meets MIL-T27730A specification. Suitable for use on oxygen and potable water systems. Plastic spool and shell. Individually boxed with hang tab.
SharkBite 10' X 2" X 0.02" silicone wrap is a self-adhesive tape that protects brass fittings from contaminants that can be found in ground conditions. Underground burials of SharkBite fittings require that the fitting be wrapped in an impermeable material in order for a warrantied connection. This wrap stretches up to 300\% for easy use and creates a watertight seal by bonding within minutes. Working temperature from -65 to 500 degree Farenheit. Wrap comes in 10 ft long rolls.
Pure white pipe thread sealant. Nonhardening. Withstands up to 3000 P.S.I. and temperatures from -50 deg. F. to +500 deg. F. For use on PVC, ABS, CPVC, polypropylene, iron, or steel threads. Apply to clean Male threads and assemble the joint. Not for use on oxygen systems.
Blue Monster PTFE pipe thread sealant is formulated with PTFE resin, a polymer consisting of recurring tetrafluoroethylene monomers whose formula is (CF2-CF2). It is inert and compatible with a very wide range of materials. Use Blue Monster on threads made from all metals, PVC, CPVC, ABS and nylon plastic pipe systems. CSA (Canadian Standards Association) approved for gas. NSF (National Sanitation Foundation) approved for potable water. Non-hardening, slow-drying soft-set formula is non-toxic and grit free.
Blue Monster PTFE Thread Seal Tape is a thicker, denser, general-purpose thread seal tape that's 5 times more tape than conventional rolls of low-density thin tapes. Fewer wraps are necessary to affect a leak-proof seal and it applies easily. No waste and no re-taping make sealing joints a breeze. Manufactured from PTFE (polytetrafluoroethylene) resin, a polymer consisting of recurring tetrafluoroethylene monomers whose formula is (CF2-CF2)n. It is inert and compatible with a very wide range of materials. Use on threads made from galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, polypropylene, PVC (polyvinyl chloride), CPVC (chlorinated polyvinyl chloride), ABS (Acrylonitrile Butadiene Styrene), fiberglass, and more.
Blue Monster PTFE Thread Seal Tape is a thicker, denser, general-purpose thread seal tape that's 5 times more tape than conventional rolls of low-density thin tapes. Fewer wraps are necessary to affect a leak-proof seal and it applies easily. No waste and no re-taping make sealing joints a breeze. Manufactured from PTFE (polytetrafluoroethylene) resin, a polymer consisting of recurring tetrafluoroethylene monomers whose formula is (CF2-CF2)n. It is inert and compatible with a very wide range of materials. Use on threads made from galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, polypropylene, PVC (polyvinyl chloride), CPVC (chlorinated polyvinyl chloride), ABS (Acrylonitrile Butadiene Styrene), fiberglass, and more.
Blue Monster PTFE Thread Seal Tape is a thicker, denser, general-purpose thread seal tape that's 5 times more tape thanconventional rolls of low-density thin tapes. Fewer wraps are necessary to affect a leak-proof seal and it applies easily. No waste and no re-taping make sealing joints a breeze. Manufactured from PTFE (polytetrafluoroethylene) resin, a polymer consisting of recurring tetrafluoroethylene monomers whose formula is (CF2-CF2)n. It is inert and compatible with a very wide range of materials. Use on threads made from galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, polypropylene, PVC (polyvinyl chloride), CPVC (chlorinated polyvinyl chloride), ABS (Acrylonitrile Butadiene Styrene), fiberglass, and more.
Blue Monster PTFE Thread Seal Tape is a thicker, denser, general-purpose thread seal tape that's 5 times more tape than conventional rolls of low-density thin tapes. Fewer wraps are necessary to affect a leak-proof seal and it applies easily. No waste and no re-taping make sealing joints a breeze. Manufactured from PTFE (polytetrafluoroethylene) resin, a polymer consisting of recurring tetrafluoroethylene monomers whose formula is (CF2-CF2)n. It is inert and compatible with a very wide range of materials. Use on threads made from galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, polypropylene, PVC (polyvinyl chloride), CPVC (chlorinated polyvinyl chloride), ABS (Acrylonitrile Butadiene Styrene), fiberglass, and more.